What are the effects of LED lamp beads on the LED display? part one

1. Perspective

The viewing angle of the LED display is determined by the viewing angle of the LED lamp beads. At present, most outdoor displays use elliptical LEDs with a horizontal viewing angle of 100° and a vertical viewing angle of 50°, while indoor displays use SMD LEDs with a horizontal and vertical viewing angle of 120°. The display screen on the highway generally uses 30° because of its particularity; a round LED with a viewing angle is sufficient. Some high-rise display screens have higher requirements for vertical viewing angles. Viewing angle and brightness are contradictory to each other, and a large viewing angle will inevitably reduce brightness. The choice of perspective needs to be determined according to the specific purpose.

2. Brightness

LED brightness is an important determinant of display brightness. The higher the brightness of the LED, the greater the margin for the use of current, which is good for saving power and keeping the LED stable. LEDs have different angle values. When the brightness of the chip is fixed, the smaller the angle, the brighter the LED, but the smaller the viewing angle of the display. Generally, a 100-degree LED should be selected to ensure sufficient viewing angle of the display screen. For displays with different dot pitches and different viewing distances, a balance should be found in brightness, angle, and price.

3. Failure rate

Since the full-color display screen is composed of tens of thousands or even hundreds of thousands of red, green, and blue LEDs, the failure of any color LED will affect the overall visual effect of the display screen. Generally speaking, according to industry experience, the failure rate between the start of assembly of the LED dishttps://www.jinhuaelec.com/led-displayplay and the 72-hour aging before shipment should be no more than three ten thousandths (referring to the failure caused by the LED lamp beads itself).

4. Antistatic ability

LED is a semiconductor device, which is sensitive to static electricity and can easily cause static failure. Therefore, the antistatic ability is very important to the life of the display screen. Generally speaking, the failure voltage of the human body electrostatic mode test of the LED should not be lower than 2000V.